This Package Includes:

• Main Component
• Box Attachment
• Bushing Kit

The Lift King Light Duty Package comes with everything needed for one technician of any size to remove or install OEM pickup boxes of all sizes, including 8’ dually boxes.

Once the pickup box is ready for removal, the Lift King Main Component quickly converts from the stored position to the working position without needing any tools. The Main Component is then connected to the pickup box, and the box is removed in less than five minutes including the original set up time. After removal, the box can easily be moved around the shop.

The box attachment also comes with a set of rear connecting straps for boxes without tailgate hinge pins, or a box with extreme rear damage. In most cases, rear bumpers are not required to be removed.

Some of the many benefits:

• One technician, one tool operation
• Improve safety by avoiding technician strain and injury
• Improve productivity with one technician instead of four
• Mitigates the risk of damage
• Remove boxes with little clearance from the cab damage free
• Lift the box to the desired height when performing repairs
• Cut labor time in half when performing fuel pump replacements

The Lift King is the safest and most efficient way to remove or install a pickup box.

The post Lift King LKLD Light Duty Lift Package appeared first on Hawk Fleet Auto Repair.

Description

• AMGO Heavy duty two post lifts are the best choice for heavy duty vehicles or trucks in commercial  shops… stronger and higher!

Features

•  12,000 lbs capacity
•  Single-point safety release
•  4 three-stages arms allowing to lift the trucks from short to long wheel base
•  Automatic arm restraints keep the arms locked in their proper positions
•  Self-lubricating UHMW Polyethylene sliders and bronze bushings
•  Adjustable two height setting accommodate varying service ceiling heights
•  Aircraft quality cable is used for synchronization
•  Detachable foot guard and tool tray to allow for a clutter free work space
•  Five-year Warranty on Steel Components, Three-year Warranty on Hydraulic Parts and Two Years on Electrical Components

Specifications

• Model: OH-12
• Lifting Capacity:  12,000 lbs (5,443 kg)
• Lifting Time:  69S
• Lifting Height: 72 1/2″ ~ 81 1/2″ (1842~2071mm)
• Overall Height:  174″/ 198″ (4420/5029mm)
• Overall Width: 150 3/4″ (3829mm)
• Drive-Thru Clearance: 109 3/4″ (2787mm)
• Width Between Columns: 123 1/2″ (3137mm)
• Minimum Pad Height: 4 1/2″ (115mm)
• Motor: 2.0HP/220V/50Hz,Single Phase
• Gross: Weight 2,355 lbs (1068 kg)

The post AMGO Hydraulics OH-12 Heavy-duty, clear-floor, 12,000lbs 2-post lift appeared first on Hawk Fleet Auto Repair.

Replace your standard length arms with these extra long arms, which will work with your existing lift and adapter pads. The long arms provide 8″ in extra length to reach those wider framed vehicles, making it easier than ever to lift them up for some quick detailing or maintenance. (Set of 2)

Specifications

• Length 26.75″
• Width 3.75″
• Front Extention Dimensions N/A
• Titan Manual Sku N/A
• Shipping Weight 50 Lbs

The post Titan Lifts Long Arms For Mrl-6000-La Mid-Rise Scissor Lift (Set Of 2) appeared first on Hawk Fleet Auto Repair.

Overall Features of 44018 4-POST CAR LIFT Series

Challenger’s 18,000 lb. capacity medium-duty 4-post is great for shops servicing light- and medium-duty vehicles. The 18000 features leaf chains and sealed roller bearings. We offer general service or alignment models.  The alignment package includes two 9,000 lb. capacity rolling jacks and an internal airline kit for dual jack operation in addition to stainless steel turning radius gauges.

• 18,000 lb. lift capacity
• 194” to 236” max wheelbase
• Single-point air actuated lock release disengages column locks simultaneously (Alignment model only)
• Diamond-plate approach ramps for positive vehicle traction
• Adjustable runways to accommodate tread widths of a variety of medium-sized transit vehicles (rolling jack application requires fixed runways and runway spacing of 33-15/16″ to 41-11/16″)
• Approach ramps with heavy-duty steel roller wheels
• Available with black columns only
• Built-in runway rail system provides versatility to add convenience options like rolling jacks and oil drain pan (sold separately)

Specific Features of 44018

 Additional Parts and Accessories

The post Challenger Lifts 44018 Medium-Duty 4-Post Lift 18,000 lb. capacity appeared first on Hawk Fleet Auto Repair.

The only single mobile column lift in the market – Scroll down to see our video!

The iDEAL MSC6KLP 6,000lb capacity single post car lift is the perfect lift for limited space applications and situations where portability is more important than a floor mounted two post lift . The MSC6KLP low profile design and drive over ramps makes drive over loading possible and the pallet jack mechanism allows the lift to be moved to the vehicle for loading.

The iDEAL MSC6KLP 6,000lb capacity can be used in a typically service bay , out side an existing bay or a home garage with limited space as long as the concrete is flat . With a lifting height of 72” the iDEAL MSC6KLP’ s design allows access to the under side of most vehicles making it ideal for pre-service inspections or maintenance. Around the vehicle access makes wheel service possible on most vehicles. Because of its design and portability the MSC6KLP is the perfect solution for a homeowner with limited space and a shop looking to improve work flow or gain additional revenue from previously unusable space.

Features

The post iDEAL MSC-6KLP 6,000Lbs Low Profile Mobile Single Column Lift appeared first on Hawk Fleet Auto Repair.

Features & Benefits
9,000 lb. lift capacity
10’ 7/8” overall column height is ideal for servicing vehicles in a low ceiling height
Low profile drive-over floor plate for easy vehicle positioning
3-stage front and 3-stage rear arms accommodate a wide range of common cars, trucks, vans as well as SUVs within the same service bay
Electric/hydraulic heavy-duty chain lifting operation with cable equalization to reduce ceiling height requirement
Dual-point mechanical pull-lock cable release system
Fully gusseted base plate design increases column rigidity
Premium double telescoping screw pads adjust to multiple heights minimizing the need for adapters
Powder coat finish provides long-lasting durability
Plated arm restraints and arm pins inhibit rust and provide long-lasting durability
Standard dual integrated rubber door guards help protect vehicle panels from inadvertent damage
Specifications
Model Number CLFP9
Lifting Capacity 9,000 lbs.
Lifting Configuration Symmetric
Arms 3-stage front/3-stage rear
Rise Height 78.125”
Overall Height 120.875“
Overall Height (Cylinder Extended) 120.875“
Overall Width 137.5“
Drive-Thru Clearance 98.187“
Front Arm Reach 24.5“ / 44.5“
Rear Arm Reach 24.5“ / 44.5“
Screw Pad Height 4” / 5.875“
Inside Columns 109”
Motor / Voltage 2HP, 208v-230v, 60Hz, 1Ph
Speed of Rise 50 s
Ceiling Height Required 10’ 2“
Colors Available Red, Blue

The post Challenger Lifts CLFP9 Symmetric Low Ceiling Two Post Floorplate Lift appeared first on Hawk Fleet Auto Repair.

This lift features a 110V power unit mounted to a portable dolly, adjustable screw-style height adapters and rubber coated lifting arms to protect both your lift and your vehicle. With an industry leading 5 Year Structural & 2 Year Hydraulic/Electrical warranty, this is the ideal scissor lift for tire service, detailing and body work for the shop or home enthusiast.

Specifications:
Warranty: 5 Year Structural / 2 Year Hydraulic/Electrical
Power Unit: 110V
Length: 82.75″
Min Width: 39.5″
Max Width: 65.375″
Lowered Height: 5.5″
Max Working Height: 50.5″
Locking Heights:
Position 1 21″ Position 1 w/Adapter 26.5″
Position 2 27.25″ Position 2 w/Adapter 32.75″
Position 3 32.5″ Position 3 w/Adapter 38″
Position 4 37″ Position 4 w/Adapter 42.5″
Position 5 41.5″ Position 5 w/Adapter 47″
Position 6 45.5″ Position 6 w/Adapter 51″
Shipping Info
Shipping Length 83″
Shipping Width 40″
Shipping Height 25″
Shipping Weight 1,020 lb
Power Unit 110V
Length 82.75″
Min Width 39.5″
Max Width 78.75″
Lowered Height 5.8125″
Max Working Height 51″

The post Titan Lifts PREMIER SERIES 6,600 lb Mid Rise Scissor Lift appeared first on Hawk Fleet Auto Repair.

Description

Challenger’s midrise lift is a great way to increase the productivity of any shop. We mounted the motor to a heavy-duty tow dolly, making it portable and able to operate on concrete, indoors or out. Save valuable shop space while servicing brakes or tires. 6,000 lb. capacity will lift vehicles from small passenger cars to light trucks. Includes auxiliary adapters to reach an even wider range of vehicle lift points. Exclusive features also include a sliding/rotating arm design with rubber pads, low drive-over clearance, and much more.

Features & Benefits

• 6,000 lb. lift capacity
• 52.75” raised height
• 40” overall width
• Short and tall auxiliary adapters come standard to reach pickup points on a wider range of vehicles
• Multiple locking positions accommodates higher profile vehicles and provides maximum headroom to work underneath vehicles
• Powder coated finish provides long-lasting durable finish

Specifications

The post Challenger Lifts MR6 Portable 6,000 Lbs Capacity Mid Rise Car Lift appeared first on Hawk Fleet Auto Repair.

Challenger adds the industry leading Versymmetric Technology to the popular economy grade 10,000 lb 2-post lift, the LE10. Expand your service capabilities with the VLE10’s ability to lift a wide range of vehicles, including Forbes Top 20 Best-Selling Vehicles of 2020.

Features and Benefits

• 3-Stage Versymmetric front arms and 2-Stage rear arms provide a wide arm sweep for asymmetric and symmetric lifting in the same service bay. 
• 11.875” standard height fits in service bays with 12’ ceiling height. 
• Double telescoping screw pads with rubber foot pad. 
• Padded overhead shut-off system prevents vehicle damage. 
• Jacketed pulley-less single-point mechanical lock release system that was once exclusive to our CL series lifts are now standard on the VLE10. 
• Rubber door guards protect vehicle from door damage. 
• Premium powder coat finish provides long-lasting durability. 
• Plated arm restraints and arm pins inhibit rust and provide long-lasting durability. 

Specifications

Additional Parts and Accessories

The post Challenger Lifts VLE10 Versymmetric 10,000 Lb. 2 Post Lift appeared first on Hawk Fleet Auto Repair.

Description

Challenger’s shortrise lift is a great choice for brake and tire servicing needs. Dual hydraulic cylinders provide a 10,000 lb. capacity to lift vehicles ranging from small passenger cars to light trucks. Standard spotting blocks and optional auxiliary adapters reach an even wider range of vehicle lift points.

Features & Benefits

• 10,000 lb. lift capacity
• 22” raised height
• Standard two-position spotting blocks reach pickup points on a wider range of vehicles
• Three locking positions for ease of use
• Powder coat finish provides long-lasting durability
• Can be mounted flush

Specifications

Additional Parts and Accessories

The post Challenger Lifts SRM10 Short Rise 10,000 Lbs Vehicle Lift appeared first on Hawk Fleet Auto Repair.