engine Hoist Archives - Hawk Fleet Auto Repair https://elitefleetrepairs.com/product-category/engine-hoist/ Sat, 28 Jan 2023 10:42:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.3 https://12o3bd.p3cdn1.secureserver.net/wp-content/uploads/2023/01/fav-150x150.jpg engine Hoist Archives - Hawk Fleet Auto Repair https://elitefleetrepairs.com/product-category/engine-hoist/ 32 32 Norco 72700A 1 Ton Under Hoist Truck Transmission Jack https://elitefleetrepairs.com/product/norco-72700a-1-ton-under-hoist-truck-transmission-jack/ Sat, 28 Jan 2023 10:42:46 +0000 https://elitefleetrepairs.com/?post_type=product&p=670 Norco 72700A 1 Ton Under Hoist Truck Transmission Jack. INTENDED USE: Designed for the removal, installation and transportation (in the

The post Norco 72700A 1 Ton Under Hoist Truck Transmission Jack appeared first on Hawk Fleet Auto Repair.

]]> Norco 72700A 1 Ton Under Hoist Truck Transmission Jack.

INTENDED USE:

  • Designed for the removal, installation and transportation (in the lowered position) of heavy duty truck transmissions that are raised by an in-ground or above-ground lift.

FEATURES:

  • Fully adjustable universal saddle with adjustable corner brackets and safety chain.
  • Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
  • 2” diameter, flash chromed, single stage ram provides added stability throughout the entire lift range.
  • Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.
  • Wide base with four 3-7/8” diameter heavy duty swivel ball bearing caster wheels provides stability and easy maneuvering.

DIMENSIONS:

  • Low Lift Height 45.75″
  • High Lift Height 74.25″
  • Base Dimensions 38″ x 38″
  • Shipping Weight 292 lbs.

The post Norco 72700A 1 Ton Under Hoist Truck Transmission Jack appeared first on Hawk Fleet Auto Repair.

]]> Norco 72701A 1 Ton Under Hoist, Air/Hyd. Truck Trans. Jack https://elitefleetrepairs.com/product/norco-72701a-1-ton-under-hoist-air-hyd-truck-trans-jack/ Sat, 28 Jan 2023 10:41:43 +0000 https://elitefleetrepairs.com/?post_type=product&p=669 Norco 72701A 1 Ton Under Hoist, Air/Hyd. Truck Trans. Jack. INTENDED USE: Same as the model 72700A with the added convenience of

The post Norco 72701A 1 Ton Under Hoist, Air/Hyd. Truck Trans. Jack appeared first on Hawk Fleet Auto Repair.

]]> Norco 72701A 1 Ton Under Hoist, Air/Hyd. Truck Trans. Jack.

INTENDED USE:

  • Same as the model 72700A with the added convenience of an air/hydraulic foot pump.

FEATURES:

  • Air/hydraulic foot pump provides hands free operation and easy convenient lifting.
  • Metered pump valve provides safe lowering of load.
  • Fully adjustable universal saddle with adjustable arms to position the transmission.
  • Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
  • Heavy duty chain with convenient chain tensioner secures load to saddle.
  • 2” diameter, flash chromed, single stage ram provides added stability throughout the entire lift range.
  • Wide base with four 3-7/8” diameter heavy duty swivel ball bearing caster wheels provides stability and easy maneuvering.

DIMENSIONS:

  • Low Lift Height 41.25″
  • High Lift Height 69.375″
  • Base Dimensions 37.5″ x 38″
  • Shipping Weight 273 lbs.

The post Norco 72701A 1 Ton Under Hoist, Air/Hyd. Truck Trans. Jack appeared first on Hawk Fleet Auto Repair.

]]> Assenmacher OFGMRD08 Ford And Gm Engine Oil Funnel https://elitefleetrepairs.com/product/assenmacher-ofgmrd08-ford-and-gm-engine-oil-funnel/ Sat, 28 Jan 2023 10:38:08 +0000 https://elitefleetrepairs.com/?post_type=product&p=667 Assenmacher OFGMRD08 Ford And Gm Engine Oil Funnel Specifications: Made of Strong Polycarbonate No More Mess Attaches Directly to the

The post Assenmacher OFGMRD08 Ford And Gm Engine Oil Funnel appeared first on Hawk Fleet Auto Repair.

]]> Assenmacher OFGMRD08 Ford And Gm Engine Oil Funnel

Specifications:

  • Made of Strong Polycarbonate
  • No More Mess
  • Attaches Directly to the Engine Oil Filler Neck
  • Fits [2011] Ford 6.7L Turbo Diesel
  • Applicable: Aston Martin, Buick, Cadillac, Chevrolet, Ford, GMC, Hyundai, Jaguar, Land Rover, Mazda, Mercury, Pontiac and SaturN
  • Made of strong polycarbonate. No more mess. Attaches directly to the engine oil filtler neck. NOTE: For Ford Power Stroke diesel engines (9.6L, 7.3L, 6.0L & 6.4L), see the #OFHON 1033

Tool Applications for Individual Tools listed below(List includes applications for all tools included. Some models appear duplicated):

  •      2005 – 2013 Aston Martin – DB9
  •      Buick
  •      2011 – 2014 Buick – Lacrosse
  •      2014 – 2014 Cadillac – ATS
  •      2008 – 2014 Cadillac – CTS
  •      2016 – 2016 Cadillac – CTS4
  •      2014 – 2014 Cadillac – Escalade ESV
  •      2014 – 2014 Cadillac – SRX
  •      2014 – 2014 Cadillac – XTS Sedan
  •      Chevrolet
  •      Chevrolet – Cobalt
  •      Chevrolet – Colorado
  •      2006 – 2014 Chevrolet – Corvette
  •      2019 – 2019 Chevrolet – Duramax Diesel – Used with #OFAAGM Adapter
  •      Chevrolet – Silverado, [V8], gas
  •      2019 – 2019 Chevrolet – Silverado with Duramax Diesel
  •      Chevrolet – Tahoe
  •      Chevrolet – Trailblazer
  •      2015 – 2015 Chevrolet – Trax , 1.4L Ecotec
  •      Chevrolet – Van
  •      Ford – E-Series Van
  •      Ford – Edge
  •      2011 – 2011 Ford – Escape
  •      Ford – Expedition
  •      Ford – Explorer
  •      2018 – 2018 Ford – Explorer 3.5L – Used with OFAAGM
  •      Ford – F-150
  •      2013 Ford – F-150, 3.5L Ecoboost
  •      2018 – 2019 Ford – F-150 3.0L V6 Diesel Power Stroke
  •      2016 – 2016 Ford – F-250, 6.7L Power Stroke [V8]
  •      2018 – 2018 Ford – F-350
  •      Ford – Flex
  •      2005 – 2016 Ford – Mustang
  •      Ford – Ranger
  •      2011 – 2011 Ford – Taurus
  •      2016 – 2016 Ford – Transit, 3.5L Ecoboost
  •      GMC
  •      GMC – Envoy
  •      2014 – 2014 GMC – Sierra
  •      2014 – 2014 GMC – Sierra 1500
  •      2015 – 2015 GMC – Sierra 2500 HD
  •      2016 – 2016 GMC – Sierra 3500, 6.6L Duramax DSL
  •      2014 – 2014 GMC – Sierra 3500 HD Denali
  •      2014 – 2014 GMC – Terrain
  •      2014 – 2014 GMC – Terrain Denali
  •      2015 – 2015 GMC – Yukon
  •      Hyundai
  •      2001 – 2006 Hyundai – Santa Fe, 2.4L
  •      2002 – 2005 Hyundai – Sonata
  •      2006 – 2010 Hyundai – Tiburon
  •      2004 – 2010 Hyundai – Tucson
  •      2015 – 2015 Jaguar – F-Type (X152)
  •      2000 – 2008 Jaguar – S Type
  •      2000 – 2008 Jaguar – X Type
  •      2010 – 2016 Jaguar – XF
  •      2010 – 2016 Jaguar – XFR
  •      2010 – 2016 Jaguar – XJ
  •      2010 – 2016 Jaguar – XJR
  •      2010 – 2016 Jaguar – XK
  •      2010 – 2016 Jaguar – XKR
  •      2010 – 2017 Land Rover – LR4
  •      2010 – 2017 Land Rover – Range Rover
  •      2010 – 2017 Land Rover – Range Rover Sport
  •      2007 – 2015 Mazda – CX-9
  •      2005 – 2005 Mercury – Mountaineer
  •      2008 – 2008 Pontiac – G6
  •      2003 – 2003 Saab – 9-3

The post Assenmacher OFGMRD08 Ford And Gm Engine Oil Funnel appeared first on Hawk Fleet Auto Repair.

]]> Norco 78106A 2500 Lb. Capacity Folding Engine Crane – U.S.A. https://elitefleetrepairs.com/product/norco-78106a-2500-lb-capacity-folding-engine-crane-u-s-a/ Sat, 28 Jan 2023 10:35:17 +0000 https://elitefleetrepairs.com/?post_type=product&p=665 Norco 78106A 2500 Lb. Capacity Folding Engine Crane – U.S.A. INTENDED USE: Designed to raise, lower and transport automobile engines,

The post Norco 78106A 2500 Lb. Capacity Folding Engine Crane – U.S.A. appeared first on Hawk Fleet Auto Repair.

]]> Norco 78106A 2500 Lb. Capacity Folding Engine Crane – U.S.A.

INTENDED USE:

Designed to raise, lower and transport automobile engines, transmissions, differentials and other heavy loads with minimal effort.

FEATURES:

  • Four position telescopic boom with 3/8” proof chain and hook.
  • 3 ton capacity hydraulic power unit provides faster raising action and a large diameter ram to withstand angle loads.
  • Low profile design (4-3/4” from top of legs to ground) allows positioning under low ground clearance vehicles.
  • Quick foldable legs and boom save shop space (22-1/2” x 51-3/4”) and prepare crane for transport or storage within seconds.
  • 4” diameter front wheels and locking rear caster wheels provide positive steering and easy maneuvering. Locking caster wheels secure crane from moving when in use.

DIMENSIONS:

  • Min. Boom Height 0″
  • Max. Boom Height 88″
  • Length 74.5″
  • Width 51.75″
  • Height 70.75″
  • Shipping Weight 320 lbs.

The post Norco 78106A 2500 Lb. Capacity Folding Engine Crane – U.S.A. appeared first on Hawk Fleet Auto Repair.

]]> Ranger RST-500ES 1,500-Lb. Engine Support https://elitefleetrepairs.com/product/ranger-rst-500es-1500-lb-engine-support/ Sat, 28 Jan 2023 10:31:38 +0000 https://elitefleetrepairs.com/?post_type=product&p=659 Ranger RST-500ES 1,500-Lb. Engine Support Don’t Trust Your Engine’s Care to Anything but Ranger The engine is the heart and

The post Ranger RST-500ES 1,500-Lb. Engine Support appeared first on Hawk Fleet Auto Repair.

]]> Ranger RST-500ES 1,500-Lb. Engine Support

Don’t Trust Your Engine’s Care to Anything but Ranger

The engine is the heart and soul of a vehicle. Don’t trust its care to anything but Ranger. If you’re replacing or servicing engine mounts but don’t want to hoist the entire engine to do so, save time and money with a superior-quality engine support beam. Professionals and DIY’ers both benefit from having an engine support hand for fast access to the engine.

The RST-500ES is designed for unparalleled adaptability: threaded adjustable chain hooks and telescoping side foot pads adjust to all manner of engine compartments. Wheel well to wheel well support provides a solid foundation for up to 1,500 lbs. of engine while you’re working on the transmission or dropping a sub-frame. This engine support is both easy to use and saves real time, every time. And we all know that in this business, time means money.

Features

  • Straddles inner fender wells to support engines
  • Adjusts to fit all vehicles
  • Precisely positions engine for easy gear box and transmission removal
  • Perfect for 4 and 6 cylinder engines
  • Rubber foot pads prevent damage and holds load securely

Specifications

  • Holding Capacity 1,500 lbs. (680 kg)
  • Max Width 63” (1,600 mm)
  • Min Width 40” (1,016 mm)
  • Screw Travel 13” (330 mm)
  • Shipping Weight 50 lbs. (23 kg)
  • Shipping Dimensions 41” x 8” x 3” (1041 mm x 203 mm x 76 mm)

The post Ranger RST-500ES 1,500-Lb. Engine Support appeared first on Hawk Fleet Auto Repair.

]]> Zinko ZES-050 1/2 Ton Engine Stand https://elitefleetrepairs.com/product/zinko-zes-050-1-2-ton-engine-stand/ Sat, 28 Jan 2023 10:29:22 +0000 https://elitefleetrepairs.com/?post_type=product&p=662 Zinko ZES-050 1/2 Ton Engine Stand Description Engine Stand, 0.5 ton. A heavy-duty repair stand for mounting great variety of

The post Zinko ZES-050 1/2 Ton Engine Stand appeared first on Hawk Fleet Auto Repair.

]]> Zinko ZES-050 1/2 Ton Engine Stand

Description

Engine Stand, 0.5 ton.
A heavy-duty repair stand for mounting great variety of engines, transmissions, and rear axis of trucks, tractors, and construction equipment.

Features

  • Four adjustable attachment arms make engine mounting fast and easy.
  • The engine mounting head can be rotated a full 360 degrees with a turn of the handle.
  • A locking pin secures the work in any of eight positions.
  • Two rigid wheels in back and two swivel casters in front provide maximum stability and mobility.
Model number Capacity (Tons) Dimensions (in) Weight (lbs)
Width-R Width-F Length Height
ZES-050  1/2 29 1/8 13 3/8 32 3/8 35 53

The post Zinko ZES-050 1/2 Ton Engine Stand appeared first on Hawk Fleet Auto Repair.

]]> Zinko ZES-100 1 Ton Engine Stand https://elitefleetrepairs.com/product/zinko-zes-100-1-ton-engine-stand/ Sat, 28 Jan 2023 10:25:58 +0000 https://elitefleetrepairs.com/?post_type=product&p=657 Zinko ZES-100 1 Ton Engine Stand

The post Zinko ZES-100 1 Ton Engine Stand appeared first on Hawk Fleet Auto Repair.

]]>

Zinko ZES-100 1 Ton Engine Stand

The post Zinko ZES-100 1 Ton Engine Stand appeared first on Hawk Fleet Auto Repair.

]]> Ranger RES-1TF 1-Ton Folding Engine Stand https://elitefleetrepairs.com/product/ranger-res-1tf-1-ton-folding-engine-stand/ Sat, 28 Jan 2023 10:24:16 +0000 https://elitefleetrepairs.com/?post_type=product&p=655 Ranger RES-1TF 1-Ton Folding Engine Stand Heavy-Duty Engine Stand That Still Saves You Space The RES-1TF 1-ton capacity engine stand

The post Ranger RES-1TF 1-Ton Folding Engine Stand appeared first on Hawk Fleet Auto Repair.

]]>

Ranger RES-1TF 1-Ton Folding Engine Stand

Heavy-Duty Engine Stand That Still Saves You Space

The RES-1TF 1-ton capacity engine stand is all about functional convenience. When you need it, it’s right there to lend its helping 360° swivel claw. When you’re done, just fold it up and put it in a corner, where it will wait patiently until called upon again. The RES-1TF features a sturdy, wide-base design to prevent tipping under load, and the front swivel casters let you position the engine exactly where you need it. The neck is reinforced to eliminate flex while the slotted adjustable saddle permits quick and easy installation.

But, the most important thing to know about the RES-1TF is that it’s a true team player. Unlike other hulking pieces of shop equipment that constantly make their presence known by getting in your way, this engine stand gets the job done and then gracefully fades into the background of the garage. Make the RES-1TF a part of your team today.

Features

  • Folds upright to conserve valuable floor space
  • Heavy steel construction for maximum durability
  • Neck is reinforced to increase strength and eliminate flex
  • Long rubber-grip handle eases positioning
  • Head swivels 360° to easily position engine
  • Slotted adjustable saddle permits quick and easy installation
  • Heavy-duty swivel casters
  • 4-wheel design provides maximum stability

Specifications

  • Holding Capacity 2,000 lbs. (907 kg)
  • Overall Height 37.5” (953 mm)
  • Overall Length 41” (1,041 mm)
  • Rear Width 27.5” (2,210 mm)
  • Front Width 31” (787 mm)
  • Shipping Weight 106 lbs. (38 kg)
  • Shipping Dimensions 38” x 18” x 7” (965 mm x 457 mm x 178 mm)

The post Ranger RES-1TF 1-Ton Folding Engine Stand appeared first on Hawk Fleet Auto Repair.

]]> Stan Design TA2600 2600 Lb. Engine & Transmission Lift Table https://elitefleetrepairs.com/product/stan-design-ta2600-2600-lb-engine-transmission-lift-table/ Sat, 28 Jan 2023 10:20:30 +0000 https://elitefleetrepairs.com/?post_type=product&p=649 Stan Design TA2600 2600 Lb. Engine & Transmission Lift Table Safely & Efficiently remove entire assemblies, remove or install transmission.

The post Stan Design TA2600 2600 Lb. Engine & Transmission Lift Table appeared first on Hawk Fleet Auto Repair.

]]> Stan Design TA2600 2600 Lb. Engine & Transmission Lift Table

Safely & Efficiently remove entire assemblies, remove or install transmission.

Features

– Engine Lift Table.
– 2600 Lb. Cap.
– Air/ Hydraulic Design.
– 30 Inch X 51 Inch.
– Drilled and Tapped Surface for mounting fixtures.
– Extendable Top Deck.
– Deck angle also adjustable.
– Maximum Lift 75 Inches.
– Convenient Pull Handle.
– Dual Hydraulics.
– Locking Casters.
– Pump Unit.
– Optional Fixtures Kit.
– Air/Hydraulic Power Pack.

The post Stan Design TA2600 2600 Lb. Engine & Transmission Lift Table appeared first on Hawk Fleet Auto Repair.

]]>