BendPak 7.5 HP / 80-Gal. V-Max Elite Air Compressor
Featuring the rugged V-Max extreme-duty, four-cylinder pump design, the 7580V-601 is engineered to operate at maximum efficiency under all load conditions. This rugged, two-stage, lubricated reciprocating air compressor with 100% cast-iron pumps will provide the quality and performance required for every air-intensive application—from automotive and body repair to manufacturing and industrial service.
Features
- Made in USA
- UL, CSA, ASME certified
- 7.5 HP energy-efficient motor
- Cast-iron V-Max Elite pump features simple splash lubrication for total reliability and a “V-4” finned cylinder configuration that provides 360° cooling
- Proven air-cooled design is economical, reliable and environmentally friendly
- Two compression rings and one oil control ring provide excellent oil control and high-efficiency air delivery
- Dual drive belts require less belt tension, resulting in less load on pump bearings, longer belt life and low vibration
- Fully-enclosed belt guard
- Cast-iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed-in sleeves
- Large surface area and cooling fins on cylinders and forced-air after-cooler provide efficient heat dissipation for lower operating temperatures and dryer air.
- Air compressor runs cooler, oil life is extended and maintenance is reduced
- Tapered roller main bearings provide full contact and support of the crankshaft, and needle-type piston pin bearings properly distribute bearing loads
- Precision balanced flywheel has forced-air fan blades for optimum compressor cooling and life
- ASME-rated safety valve protects the compressor from overpressure and safeguards the operator
- Balanced flywheel and counterbalanced crankshaft result in nearly vibration-free operation
- Readily accessible disc-valves do not require disassembly of compressor piping, for easy accessibility and reduced maintenance cost and downtime
Specifications
Model | VMP-7580V-601 |
SKU# | 5179112 |
Made in USA | Yes |
MOTOR | |
Horsepower | 7.5 HP |
RPM | 1750 RPM |
Voltage | 208-230 Volt AC |
Phase | 1-Phase |
Hertz | 60 Hz |
Magnetic Starter | Yes |
Amp Draw | 32 |
Rec. Breaker | 50 Amp Breaker |
Noise | 78 dBA |
PUMP | |
Style | Two-Stage / V-4 |
RPM | 625 RPM |
Material | Solid Cast Iron |
Duty Cycle | Continuous |
Max. PSI | 175 |
CFM | 26 |
CFM Rated @ 90 PSI | 24.7 |
Pump Type | Two-Stage |
Pump Drive | Twin Belt Drive |
Oil Type | Splash Oil Lubricated |
Oil System | Full Pressure Lubrication |
TANK | |
Orientation | Vertical |
Size | 80 Gallons |
Outlet | 3/4″ NPT |
Elec. Drain Valve | Yes |
Certification | UL, CSA, ASME |
DIMENSIONS | |
Width | 24″ |
Depth | 34″ |
Height | 72″ |
Weight | 958 lbs. |